Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
Upper Side Moulding / Trim: Service and Repair
Roof Molding
Roof Molding Replacement
1. Apply protective tape to the body (A). Using a flat- tip screwdriver wrapped with protective tape (B), pry up on the roof molding (C). Take care
not to scratch the body.
2. Pull up and slide the roof molding to release the front bracket (D) from the pin (E).
3. Pull up the front portion of roof molding.
4. Pull up and release the rear bracket (A) from the pin (B), then remove the roof molding (C).