Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
Glove Compartment: Service and Repair
Glove Box Removal/Installation
SRS components are located in this area. Review the SRS component locations, and precautions and procedures in the SRS section before performing
repairs or service.
NOTE: Take care not to scratch the dashboard and related parts.
1. Remove these items:
-
Dashboard center lower cover.
-
Passenger's dashboard lower cover
2. Remove the screws from bottom of the glove box.
3. Wrap a flat-tip screwdriver with protective tape, and apply protective tape around the related pants, to prevent damage. Insert a flat-tip screwdriver
in the notch (A) of the cap (B), and release the hooks (C) by prying up the cap (B).
4. Remove the screws.