honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Headliner|Service and Repair|Page 7023 > < Glove Compartment|Service and Repair|Page 7019
Page 1
background image

Headliner: Service and Repair

Headliner Removal/Installation

NOTE:

-

When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.

-

Take care not to bend and scratch the headliner.

-

Be careful not to damage the dashboard and other interior trim.

1. Remove these items: (Sedan, Coupe)

-

Door opening trim (both sides as necessary)

-

Front pillar trim (both sides)

-

Front seat belt upper anchor bolt (both sides)

2. Remove these items:

Sedan
-

Center pillar upper trim (both sides)

Coupe
-

Coat hanger (left side)

-

Rear seat belt upper anchor bolt

-

Quarter trim panel

3. Remove the rear window antenna terminal cover.

4. Remove the sunvisor IA) and holder (B) from each side. Disconnect the vanity mirror light connectors (C) (driver's and passenger's for some

models).

5. If equipped, remove the roof console.

-1 Remove the lens (A).
-2 Remove the screws.
-3 Pull out the roof console (B), and disconnect the spotlight connector (C).

Headliner|Service and Repair|Page 7023 > < Glove Compartment|Service and Repair|Page 7019