Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
![background image](/honda/accord_se_sedan/l4-2254cc_2.3l_sohc_(vtec)_mfi/Page-2117001.png)
Rear Shelf: Service and Repair
Trim Removal/Installation - Rear Shelf Area
NOTE:
-
Put on gloves to protect your hands.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
-
Take care not to bend or scratch the trim and panels.
Remove the trim as shown.
Install the trim in the reverse order of removal, and note these items:
-
Replace any damage clips.
-
Apply liquid thread lock to the front seat belt upper anchor bolt before installation.
-
Before installing the anchor bolts, make sure there are not twists or kinks in the belts.