Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
![background image](/honda/accord_se_sedan/l4-2254cc_2.3l_sohc_(vtec)_mfi/Page-2211005.png)
3. Pull back the edge of the seat cushion cover all the way around, and release the clips (A) and fasteners (B), then remove the seat cushion cover. On
a leather seat cover, there are no fasteners (B).
4. Install the cover in the reverse order of removal, and note these items:
-
To prevent wrinkles, make sure the material is stretched evenly over the pad before securing the fasteners and clips.
-
Replace the clips with new ones (A) using commercially available upholstery ring pliers (B).
Rear Seat Side Bolster
Rear Seat Side Bolster Cover Replacement
1. Remove the seat side bolster.
2. Release all the hook strips (A), fold back the seat side bolster cover (B), and remove it.
3. Install the cover in the reverse order of removal, and to prevent wrinkles, make sure the material is stretched evenly over the pad before securing
the hook strips.