Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
3.
Push on the loosened bolts to show the clearance in the linkage. Install shims on one side or both sides of the seat base linkage, as needed. Rock
the seat-back from side to side to assist with the installation of the shims.
NOTE:
Use as many shims as necessary to eliminate the clearance but no more than four shims per side. Do not force the shims into place.
4.
Torque the four T-30 Torx bolts to 10 N.m (7.4 lb-ft).
5.
Move the seat assembly back to the midpoint position, and check for side-to-side looseness.
DISCLAIMER