Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
Brake Master Cylinder: Service and Repair
Master Cylinder Replacement
NOTICE: Do not spill brake fluid on the vehicle; it may damage the paint; if brake fluid does contact the paint, wash it off immediately with water.
1. Remove the 8 mm flange nuts (A).
2. Remove the strut brace (B).
3. Disconnect the brake fluid level switch connectors (A), and remove the reservoir cap (B).
4. Remove the brake fluid from the master cylinder reservoir (C) with a syringe.