Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
_mfi/Page-1508002.png)
7. Pull the brake booster (A) forward, then turn it to the right until the clevis (B) is clear of the bulkhead (C).
8. Remove the brake booster from the engine compartment.
9. Install the brake booster in the reverse order of removal, and note these items:
-
Adjust the pushrod length before installing the brake booster.
-
After installation, adjust brake pedal height and brake pedal free play.
-
Replace the IAT sensor O-ring and the booster clevis cotter pin.