Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
![background image](/honda/accord_se_sedan/l4-2254cc_2.3l_sohc_(vtec)_mfi/Page-1523001.png)
Brake Fluid Level Sensor/Switch: Testing and Inspection
Brake Fluid Level Switch Test
1. Remove the reservoir cap (A). Check that the float (B) moves up and down freely; if it doesn't, replace the reservoir cap assembly.
2. Check for continuity between the terminals with the float in the down position (C) and the up position (D):
-
With the float up, there should be no continuity.
-
With the float down, there should be continuity.