Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
Cruise Control Module: Testing and Inspection
Control Unit Input Test
SRS components are located in this area. Review the SRS components locations, precautions, and procedures in the SRS section before performing
repairs or service.
1. Remove the driver's dashboard lower cover.
2. Disconnect the 14P connector from the control unit.
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 4.
Part 1