Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
Cruise Control Switch: Testing and Inspection
Set/Resume/Cancel Switch
Set/Resume/Cancel Switch Test/ Replacement
1. Remove the two screws (A), then remove the switch (B).
2. Check for continuity between the terminals in switch position according to the table.
-
If there is continuity and it matches the table, but switch failure is occurred on the cruise control unit input test, check and repair the wire
harness on the switch circuit.
-
If there is no continuity in one or both positions, replace the switch.