Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
9. Remove the balancer gear case.
10. Insert a screwdriver (A) in the front balancer shaft maintenance hole (B), and remove the front balancer driven pulley (C).
11. Remove the balancer driven gear.
^
1 Remove the bolt (A) and washer (B) from the maintenance hole (C).
^
2 Scribe a line on a 6 X 100 mm bolt, 74 mm (2.9 inch) from the end.
^
3 Insert the bolt in the maintenance hole and into the hole in the rear balancer shaft (D) up to the line you scribed.
^
4 Remove the bolt and balancer driven gear (E).