Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
Balance Shaft Belt: Service and Repair
Timing Belt and Balancer Belt
Removal
Special Tools Required
^
Holder Handle 07JAB-001020A
^
Holder Attachment, 50 mm, Offset 07MAB-PY3010A
^
Socket, 19 mm 07JAA-001020A or a commercially available 19 mm socket
1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative terminal first, then the positive terminal.
3. Turn the crankshaft pulley so its TDC mark (A) lines up with the pointer (B).
4. Remove the front tires/wheels.
5. Remove the splash shield.