Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
Rocker Arm Assembly: Service and Repair
Rocker Arms and Shafts Disassembly/Reassembly
VTEC Engines
Rocker Arms and Shafts Disassembly/Reassembly
NOTE:
^
Identify parts as they are removed to ensure reinstallation in original locations.
^
Inspect the rocker shafts and rocker arms.
^
The rocker arms must be installed in the same positions if reused.
^
When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs and rocker
arms on the shaft.
^
Prior to reassembling, clean all the parts in solvent, dry them, and apply lubricant to any contact points.
^
Bundle the rocker arms with rubber bands to keep them together as a set.
Non VTEC Engine
Rocker Arms and Shafts Disassembly/Reassembly - F23A5 Engine