Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
1. Measure out-of-round at the middle of each rod and main journal in two places. The difference between measurements on each journal must not be
more than the service limit.
2. Measure taper at the edge of each rod and main journal. The difference between measurements on each journal must not be more than the service
limit.
Journal Taper:
Standard (New): 0.005 mm (0.0002 inch) maximum
Service Limit: 0.006 mm (0.0002 inch)