Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
_mfi/Page-610004.png)
24. Install the oil pump (A).
^
1 Install a new crankshaft oil seal in the oil pump (see step 17).
^
2 Apply liquid gasket part, No. 08718-0001 or 08718-0003, evenly to the block mating surface of the oil pump and to the inner threads of the
bolt holes.
^
3 Grease the lips of the oil seals and apply oil to the new O-ring (B).
^
4 Install the dowel pins (c), then align the inner rotor with the crankshaft and install the oil pump.
^
5 Clean the excess grease off the crankshaft and balancer shaft and check the seals for distortion.
25. Install the baffle plate (D), then install the oil screen (E).
26. Hold the front balancer shaft with a screwdriver (A), then install the timing balancer belt driven pulley (B).