Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
_mfi/Page-1744001.png)
Air Door Actuator / Motor: Service and Repair
Mode Control Motor
Mode Control Motor Replacement
1. Remove the wire harness clip (A), then disconnect the 7P connector (B) from the mode control motor (C). Remove the rods (D) of the mode
control motor from the mode control linkage (E). Remove the self tapping screws and the mode control motor from the heater unit.
2. Install the motor in the reverse order of removal. After installation, make sure the motor runs smoothly.
