Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
_mfi/Page-389001.png)
Drive Belt: Adjustments
Alternator Belt
Alternator Belt Inspection and Adjustment
Special Tools Required
Belt tension gauge 07JGG-001010A
Belt Tension Gauge Method
Inspection
Alternator Belt (Tension Gauge Method)
1. Attach the belt tension gauge to the belt and measure the tension. Follow the gauge manufacturer's instructions. If the bell is worn or damaged,
replace it. If the belt needs adjustment, go to step 2.
Adjustment
2. Loosen the mounting boll (A) and locknut (B).
3. Turn the adjusting bolt (C) to obtain the proper belt tension, then retighten the locknut and mounting bolt.
4. Recheck the belt tension.
5. If you installed a new belt, run the engine for 5 minutes, then readjust the belt to the used belt specification.
6. Check the power steering pump belt adjustment.
Deflection Method
Inspection