Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
_mfi/Page-894002.png)
6. Make the following input tests at connector B and the fuse/relay box socket.
-
If a test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 7.
Driver's Unit:
7. Remove the driver's multiplex control unit from the driver's under-dash fuse/relay box.
8. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, go to step 9.