honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Manifold Pressure/Vacuum Sensor > < Malfunction Indicator Lamp|Locations|Page 3004
Page 4
background image

YES - Go to step 17.

NO - Repair short in the wire between the DLC and the ECM/PCM (A10).

17. Turn the ignition switch OFF, disconnect ECM/PCM connector A (32P), then turn the ignition switch ON (II).

Does the MIL stay on?

YES - Repair short in the wire between the gauge assembly and the ECM/PCM (A18).

NO - Substitute a known-good ECM/PCM and recheck. If the symptom/indication goes away, replace the original ECM/PCM. 

Manifold Pressure/Vacuum Sensor > < Malfunction Indicator Lamp|Locations|Page 3004