honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Refueling Control Valve, Evaporative System|Specifications|Page 3368 > < Refueling Control Valve, Evaporative System|Specifications|Page 3366
Page 3
background image

NOTE:  At either location, tiny droplets of fuel are normal.

-

If fuel runs out of the hoses at either location, replace the fuel tank vapor control valve.

-

If fuel does not run out of the hoses at either location, the fuel tank vapor control system is normal.

10. Disconnect the fuel tank vapor hose quick disconnect from the EVAP canister, then plug the port on the canister. Reapply vacuum (80 pumps).

-

If the vacuum holds, replace the fuel tank vapor vent shut valve.

-

If the vacuum does not hold, inspect the EVAP canister vent shut valve O-ring. If the O-ring is OK, replace the EVAP canister and repeat step
4.

Refueling Control Valve, Evaporative System|Specifications|Page 3368 > < Refueling Control Valve, Evaporative System|Specifications|Page 3366