Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
_mfi/Page-1948003.png)
Upper / Lower Bolt Construction, Retractor Bolt Construction
11. Install the seat belt and retractor in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the upper anchor bolt before reinstallation.
-
If the threads on the retractor mounting ET screw are worn out, use an oversized ET screw (P/N 90133-SZ4-0030) made specifically for this
application.
-
Check that the retractor locking mechanism functions as described.
-
Assemble the washers, collar and bushing on the upper and lower anchor bolts as shown.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the front seat belt.
-
Make sure the seat belt tensioner connector is plugged in properly.
-
Reconnect the negative cable to the battery.
-
Enter the antitheft code for the radio, then enter the customer's radio station presets.
Front Seat Belt Buckle
Seat Belt Buckle
1. Remove the front seat.
2. Remove the following parts from the front seat:
-
Manual seat: Center cover
-
Manual height adjustable seat: center cover