Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
_mfi/Page-1949002.png)
4. Remove the lower anchor bolt (A), the retractor mounting ET screw (B), the retractor bolt (C), and remove the rear seat belt (D) and retractor (E).
5. Install the seat belt and retractor in the reverse order of removal, and note these items:
-
If the threads on the retractor mounting ET screw are worn out, use an oversized ET screw (PIN 90133-SZ4-0030) made specifically for this
application.
-
Check that the retractor locking mechanism functions as described.
-
Before installing the anchor bolt, make sure there are no twists or kinks in the rear seat belt.
Rear Center Seat Belt and Rear Buckles
Center Belt and Seat Belt Buckles
1. Remove the rear seat cushion and rear seat side bolster, both sides.
Center
2. Remove the center anchor bolts (A), and remove the seat belt buckles (B).