Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
_mfi/Page-1949004.png)
6. Install the seat belt and retractor in the reverse order of removal, and note these items:
-
If the threads on the retractor mounting ET screw are worn out, use an oversized ET screw (PIN 90133-SZ4-0030) made specifically for this
application.
-
Check that the retractor locking mechanism functions properly.
-
Assemble the washers on the center anchor bolt as shown.
-
Before installing the center anchor bolt, make sure there are no twists or kinks in the center belt.