Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
3. If the front bearing needs replacing, remove the pulley locknut with a 10 mm wrench (A) and a 22 mm wrench (B). If necessary, use an impact
wrench.
4. Remove the three flange nuts (A) and the screw (B) from the alternator, then remove the plate terminal (C).
5. Remove the washer nut (A) and insulator (B) from the "B" terminal, then remove the end cover (C) and dust seal (D).