Accord SE Sedan L4-2254cc 2.3L SOHC (VTEC) MFI (2002)
4. Compress the damper assembly by hand, and check for smooth operation through a full stroke, both compression and extension. The damper
should move smoothly. If it does not (no compression or no extension), the gas is leaking, and the damper should be replaced.
5. Check for oil leaks, abnormal noises, or binding during these tests.
Reassembly
1. Install the damper unit on a commercially available strut spring compressor (A).
2. Assemble the damper in the reverse order of removal except for the washer and self-locking nut. Align the bottom of the damper spring and the
spring lower seat (B).
3. Position the mount base (A) on the damper unit.
4. Compress the damper spring with the spring compressor.
5. Install the rubber bushing, washer (A), and a new 10 mm self-locking nut (B).
6. Hold the damper shaft, and tighten the 10 mm self locking nut.
Installation