Accord Sedan L4-2.2L SOHC VTEC (1995)
Rocker Arm Assembly: Service and Repair
Inspection
Inspection Using Special Tools
NOTE:
-
Before using the Valve Inspection Tool, make sure that the air pressure gauge on the air compressor indicates over 400 kPa (57 psi).
-
Inspect the valve clearance before rocker arm inspection.
-
Cover the timing belt with a shop towel to protect the belt from oil.
-
Check the intake primary rocker arm of each cylinder at TDC.
1. Remove the cylinder head cover.
2. Plug the relief hole with the special tool.
Applying Air Pressure For Testing
3. Remove the sealing bolt from the inspection hole, and connect the Valve Inspection Tool.
NOTE: Remove any oil from the bolt threads and camshaft holder threads before retightening the sealing bolt.