Accord Wagon L4-2.2L SOHC VTEC (1996)
Ignition Coil: Testing and Inspection
1. Turn the ignition switch OFF, and remove the distributor ignition (DI) cap.
2. Remove the two screws to disconnect the BLK/VEL and WHT/BLK wires from terminals A (+) and B (-) respectively.
3. Using an ohmmeter, measure resistance between the terminals. Replace the coil if the resistance is not within specifications.
NOTE: Resistance will vary with the coil temperature; specifications are at 68°F (20°C)
Primary Winding Resistance
Between A and B terminals: 0.45 - 0.55 Ohms
Secondary Winding Resistance
Between A and secondary winding terminals: 16.8 - 25.2 K Ohms