Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
The antenna sticks in either the up or down position.
1. Using the antenna nut wrench, remove the antenna nut, spacer, and bushing.
Power Antenna Motor Test
2. Clean the antenna mast housing threads, and reinstall the spacer and bushing.
3. Using the antenna nut wrench, tighten the antenna nut to 2.3 N-m (0.23 Kgf.m, 1.7 lbf.ft). If you overtighten the nut, the antenna may stick. If
sticking occurs, back the nut off a little, then turn the radio on and off to raise and lower the antenna again. Repeat until the antenna moves freely.