Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
11. Install the plastic cover and all removed parts.
NOTE;
^
Apply adhesive along the edge where necessary to maintain a continuous seal and prevent water leaks.
^
Do not plug the elongated holes.
^
Sedan; To prevent contamination, cover the hole at location A with adhesive tape.
12. Install the door panel.
NOTE:
^
Make sure the door harness is not pinched.
^
If necessary, replace any damaged clips.
^
Make sure the connectors are connected properly.
13. Instal) the armrest pocket (sedan/wagon, passenger's) and inner handle.
NOTE: Make sure the connector is connected properly.
14. If applicable, install the regulator handle.
15. Install the mirror mount cover panel.