Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Coupe:
Note: Make sure the lower center glass run channel is fitted into the center channel.
13. Install the regulator.
NOTE: Make sure the connector is connected properly.
14. Install the glass.
15. Coupe: Install the center channel guide and channel guide cover.
NOTE: Make sure the guide pin is installed in the center channel guide properly.
16. Roll the glass up and down to see if it moves freely without binding. Also make sure that there is no clearance between the glass and glass run
channel when the glass is closed. Adjust the position of the glass as necessary.