Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Front Door Window Regulator: Service and Repair
Glass/Regulator/Glass Run Channel Replacement
1. Remove:
^
Door panel
^
Plastic cover
2. Sedan/Wagon (Driver's):
Remove the power window switch from the door panel.
Coupe:
Driver's: Remove the armrest from the door panel
Passenger's: Remove the power window switch from the door panel.
3. Connect the power window switch to the door harness.
4. Coupe:
Lower the glass fully, then peel off the channel guide cover. Remove the screws, then remove the center channel guide by pulling it upward.
NOTE: When installing the channel guide cover, apply the double-faced adhesive tape to it.
5. Carefully move the glass until you can see the bolts, then remove them.
NOTE: Take care not to drop the glass inside the door.