Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Power Door Lock Actuator: Testing and Inspection
Driver's Door
1. Remove the door panel.
Driver's Door Lock Actuator Test
2. Disconnect the 6-P connector from the actuator.
Driver's Door Lock Actuator Test
3. Check actuator operation by connecting power and ground according to the table.
CAUTION: To prevent damage to the actuator, apply battery voltage only momentarily.
4. If the actuator fails to work properly, replace it.
Driver's Door Lock Actuator Test