Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
![background image](/honda/accord_wagon_ex/l4-2156cc_2.2l_sohc_(vtec)_mfi/Page-1776002.png)
Caliper Piston Removal
^ If necessary, apply compressed air to the caliper fluid inlet to get the piston out. Place a shop rag or wooden block as shown to cushion the
piston when it is expelled Use low pressure air in short spurts.
^ Remove the piston from the caliper, and check the piston for scoring on surface.
Caliper Seal & Boot Orientation
^ Remove the piston boot and piston seal.
CAUTION: Take care not to damage the cylinder bore.
Installation