Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
_mfi/Page-1783001.png)
Brake Pad: Testing and Inspection
Front
WARNING: Never use an air hose or dry brush to clean brake assemblies. Use an OSHA-approved vacuum cleaner to avoid breathing brake dust.
1. Loosen the front wheel nuts slightly, then raise the vehicle and support on safety stands. Remove the front wheels.
Front Brake Assembly
2. Remove the caliper bolt (pin A), and pivot the caliper up out of the way.
NOTE: Check the hoses and pin boots for damage and deterioration.
Pad And Shim Location
3. Remove the pad shims, pad retainers and pads.