Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
^
Repeat for all rockers.
-
If over limit, replace rocker shaft and all overtolerance rocker arms.
NOTE: If any intake rocker arm needs replacement, replace all three rocker arms in that set (primary, mid, and secondary).
Manual Inspection
NOTE: When reassembling the primary rocker arm, carefully apply air pressure to the oil passage of the rocker arm.
1. Inspect the rocker arm piston. Push it manually.
^
If it does not move smoothly, replace the rocker arm assembly.
NOTE:
^
Apply oil to the pistons when reassembling.
^
Bundle the rocker arms with a rubber band to keep them together as a set.
^
Set the timing plate and return spring as shown below.
VTEC Rocker Arms Inspection
VTEC ROCKER ARMS
Manual Inspection
1. Set the No. 1 piston at Top Dead Center (TDC).
2. Remove the cylinder head cover.
3. Push the intake mid rocker arm on the No. 1 cylinder manually.