Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
T/N 07MAB-PY3010A
DOHC Prelude:
Holder Attachment, 50 mm offset:
T/N 07NAB-001040A
ALL:
Holder Handle: T/N 07JAB-001020A
Belt Tension Gauge: T/N 07JGG-001010A or 07TGG-001000A
WARRANTY CLAIM INFORMATION
NOTE:
This campaign ends January 1, 2003. After that date, warranty claims for installation of a retainer, or repairs required due to a failed oil seal, will not
be accepted.
Disclaimer
Warranty Claim Filing Instructions - Updated
*A.
If the technician found that an oil seal retainer had already been installed, file a warranty claim with operation number 111008.
B.
If the technician installed an oil seal retainer, file a warranty claim with operation number 111108.
C.
If the technician replaced the oil seal because it was cocked or backed out, file a warranty claim with operation number 111124. This includes
replacing the timing belt and balancer belt if they are contaminated with oil. This repair requires DSM approval.
Flat Rate Time
Accord - 2.5 hours
Odyssey - 2.5 hours
1994-96 Prelude - 2.5 hours
1997 Prelude - 2.7 hours
D.
If the technician replaced the engine because there was significant internal engine damage due to extended driving after a complete loss of oil, file
a warranty claim with operation number 111008 as the primary operation and 111099 as the secondary operation. Show actual repair time as the
FRT with 111099, and list all parts used. This repair requires DSM approval.
NOTE:
If a vehicle with engine damage has high mileage, the DSM may authorize the installation of a reconditioned engine from an outside supplier rather
than a new engine from Honda. In that case, refer to section 6.4.1, Reimbursement for Non-Honda Parts, in the Service Operations Manual for claim
submission and credit guidelines.*
Repair Procedure
1.
Make sure you have the audio system anti-theft code, if needed. Write down your customer's radio station presets.
2.
Disconnect the negative cable from the battery.