Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
![background image](/honda/accord_wagon_ex/l4-2156cc_2.2l_sohc_(vtec)_mfi/Page-2771002.png)
1. Remove the turn signal/hazard relay from the under-dash fuse/relay box.
2. Inspect the relay and fuse/relay box socket terminals to be sure they are all making good contact.
^ If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
^ If the terminals look OK, make the following input tests at the fuse/relay box socket.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, the turn signal/hazard relay must be faulty; replace it.