Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Lock-up Control Solenoid Valve: Service and Repair
NOTE: Lock-up control solenoid valves A and B must be removed/replaced as an assembly.
1. Remove the mounting bolts and lock-up control solenoid valve assembly.
2. Check the lock-up control solenoid valve fluid passages for dust or dirt, and replace as an assembly, if necessary.
3. Clean the mounting surface and fluid passages of the lock-up control solenoid valve assembly, and install a new filter/gasket.
4. Check the connector for rust, dirt or oil, then reconnect the connector securely.