Accord Wagon EX L4-2156cc Power Steering Pump Removal and Installation
Power Steering Pump: Service and Repair
Removal and Installation
Removal
NOTE: Before disconnecting the hoses from the pump, place a suitable container under the vehicle.
1. Remove the belt by loosening the pump adjusting bolt, mounting bolts and nuts.
2. Cover the alternator with several shop towels to protect if from spilled power steering fluid.
3. Disconnect the inlet hose and the outlet line from the pump and plug them.
NOTE: Take care not to spill the fluid on the body or parts. Wipe off any spilled fluid at once.
4. Remove the pump mounting bolt, then remove the pump.
NOTE:
^
Do not turn the steering wheel with the pump removed.
^
Cover the opening of the pump with a piece of tape to prevent foreign material from entering the pump.
Installation
1. Connect the inlet hose and the outlet line. Tighten the pump fittings securely.