Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
Shift Interlock Solenoid: Service and Repair
Shift Lock Solenoid Test/Replacement
1. Remove the solenoid pin.
2. Remove the self-locking nuts and shift lock solenoid.
Shift Lock Solenoid Test/Replacement
3. Install the new shift lock solenoid in the reverse order of removal, and adjust its position.
^ When the shift lock solenoid is ON, check that there is a clearance of 4.2 ± 0.5 mm (0.165 ± 0.020 in) between the top of the shift lock lever
and the lock pin groove, and tighten the self-locking nuts.
NOTE: Use brand-new self-locking nuts.
^ When the shift lock solenoid is OFF, make sure that the lock pin is blocked by the shift lock lever.
Shift Lock Solenoid Test/Replacement
NOTE: Test the solenoid after you assembled it.