Accord Wagon EX L4-2156cc 2.2L SOHC (VTEC) MFI (1997)
_mfi/Page-2866001.png)
Wiper Motor: Testing and Inspection
Front Wiper Motor
1. Open the hood, and remove the cap nuts and the wiper arms.
2. Disconnect the 5-P connector from the wiper motor.
Windshield Wiper Motor Test
3. Test the motor by connecting battery power and ground according to the table.
^ If the motor does not run or fails to run smoothly, replace it.
Windshield Wiper Motor Test
4. Connect an analog voltmeter between the C and E terminals, then run the motor.
The voltmeter should indicate 0 V and 4 V or less alternately.