Civic L4-1.3L Hybrid (2008)
9. Turn the ignition switch to ON (II), and check that the R position indicator comes on.
10. Turn the ignition switch to LOCK (0).
11. Place the shift lever in R, then insert a 6.0 mm (0.24 inch) pin (A) into the positioning hole (B) on the shift lever bracket, through the positioning
hole (C) on the shift lever, and into the positioning hole on the bracket. Use only a 6.0 mm pin that is free of burrs.
12. Check that the shift lever is secured in R.
13. Install the shift cable end (A) over the mounting stud (B) by aligning its square hole (C) with the square fitting (D) at the bottom of the stud. Do
not install the shift cable by holding the shift cable guide (E).
