Civic L4-1.8L (2006)
*NOTE:
If you're working on a 2006 Civic with A/C, and its drive belt is not routed as shown in the "WITH A/C" illustration, use a new drive belt (P/N
04301-RNA-307, H/C 8503310) when you complete the repair.*
2.
Insert a pulley holder (see REQUIRED SPECIAL TOOLS) into one of the holes in the water pump pulley at the 12 o'clock position. The tool
holds the pulley so you can loosen or tighten the pulley bolts.
3.
Remove the water pump pulley (three bolts).
