Civic L4-1.8L (2006)
3.
Remove the splash shield.
4.
Remove the drive belt:
^
Set a long-handled, box-end wrench on the drive belt auto-tensioner from above the engine.
^
Slowly turn the wrench in the direction shown, then remove the drive belt.
NOTE:
This is a hydraulic type auto-tensioner; you must turn the wrench slowly to avoid damaging the auto-tensioner.
WITH A/C
5.
Remove the crankshaft pulley:
^
Refer to page 6-10 of the 2006-07 Civic Service Manual, or Online, enter keyword PULLEY, then select Crankshaft Pulley Removal and
Installation from the list.