Civic L4-1.8L (2006)
Rear Door Window Regulator: Service and Repair
Rear Door Glass and Regulator Replacement
4-door
NOTE: Put on gloves to protect your hands.
1. Remove the door panel.
2. Detach the harness clip (A), and disconnect the power door lock actuator connector (B). Remove the plug caps (C).
3. Pass the cable (D) and the harnesses (E) through the holes (F) and slit (G) in the plastic cover (H), then remove it.
4. Carefully move the glass (A) until you can see the bolts, then remove them. Release the glass from the holder (B), then remove it from the
regulator (C), and carefully lower the glass. Take care not to drop the glass inside the door.
