honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Electric Load Sensor > < Data Link Connector|Locations|Page 3010
Page 15
background image

Is there continuity?

YES - Go to step 82.

NO - Update the PCM if it does not have the latest software, or substitute a known-good PCM, then recheck. If the symptom/indication goes away
with a known-good PCM, replace the original PCM,

82. Continue to check for continuity between PCM connector terminal A19 and body ground, while disconnecting these connectors, one at a time:

-

A/C pressure sensor 3P connector

-

Fuel rail pressure sensor

-

FTP sensor 3P connector

Does continuity go away when any of the above sensors are disconnected?

YES - Replace the sensor that caused an open when it was disconnected.

NO - Repair short in the wire between the PCM (A19) and the A/C pressure sensor, the fuel rail pressure sensor, or the FTP sensor.

Electric Load Sensor > < Data Link Connector|Locations|Page 3010