Civic L4-1.8L CNG (2008)
NOTE: Use the new flange bolt during reassembly.
9. Install the knuckle in the reverse order of removal, and note these items:
^
First install all the components, and lightly tighten the bolts and nuts, then raise the suspension to load it with the vehicle's weight before fully
tightening to the specified torque values.
^
Align the cam positions of the adjusting bolt and the adjusting cam plate with the marked-, positions when tightening.
^
Before installing the wheel, clean the mating surfaces of the brake drum and the inside of the wheel.
^
Fill the master cylinder reservoir to the MAX (upper) level line, and bleed the brake system. Check for a leak at the brake hose/line joint, and
retighten it if necessary.
^
Check the wheel alignment, and adjust it if necessary.