Civic L4-1493cc 1.5L SOHC (16 valve) (1993)
![background image](/honda/civic/l4-1493cc_1.5l_sohc_(16_valve)/Page-1367002.png)
3.
Use a die grinder to remove 20 mm from the five support ribs shown. Smooth and radius the back edge of each rib after removing the material.
4.
Cut a 10 x 35 mm slot on the left side of the center support rib.
5.
Cut a 10 x 30 mm slot on the left side of the splash shield.