Civic L4-1590cc 1.6L SOHC (VTEC) (1992)
Brake Bleeding: Service and Repair
System Bleeding
Anti-Lock Brake System
Place vehicle on level ground with wheels blocked, put transmission in neutral for manual transmission models and in ``park'' for automatic transmission
models when bleeding brakes.
Fig. 6 Inspection Connector Location. 1992 Prelude & Civic
1.
On Accord models, with ignition switch off, disconnect 6-P inspection connector from connector cover on the crossmember under passenger seat
and connect it to anti-lock brake checker No. 07HAJ-SG0010B or 07HAJ-SG00100 or equivalent, Fig. 6.
Fig. 7 Inspection Connector Location. Accord
2.
On Prelude and Civic models, with ignition switch off, disconnect 6-P inspection connector from connector cover on the crossmember under
passenger seat and connect it to anti-lock brake checker No. 07HAJ-SG0010A or 07HAJ-SG0010B or equivalent, Fig. 7.
3.
Fill modulator reservoir to MAX level and install reservoir cap.
4.
Start engine and allow it to idle for a few minutes, then shut engine off. Check fluid in modulator reservoir and refill to MAX level if necessary.